The refers to the updated operational software and manual version for the automatic bundling system manufactured by Pike Mfg . This system streamlines hay production by taking small square bales and bundling them into steel-banded 21-bale packs. Pre-Operation Setup
Before beginning, ensure the machine is in the correct state to prevent software or mechanical errors.
: Thread the strap through the rod and spring-loaded guide. It must pass between the upper crimp roller and lower bearing. Bale Band v 2.2
: On Bale 21 , the horizontal plunger compresses the stack and ties the bundle with two steel bands.
: Pull roughly 30 inches of strapping at the end and pre-bend it into a "C" shape to help it clear the fetcher rollers. The refers to the updated operational software and
: Place the new spool; this is recommended as a two-person operation .
: The machine must be at Bale Position 0 before starting a new cycle or swapping relay boards. : Thread the strap through the rod and spring-loaded guide
: Always disengage the hydraulic supply before approaching the machine for maintenance. The emergency shut-off is an electrical switch and should not be solely relied upon for physical safety.