Based on the request, this guide focuses on working with (likely 20 pieces/units) and installing zipper sliders, commonly assisted by tools like a "zipper jig". Guide: Assembling Bulk Zipper Tape (20 Sets)

This method is used to create custom-length zippers for sewing projects like bags or pockets. Zipper Tape: (By the yard/meter) Zipper Sliders/Pulls: (20+ pcs) Zipper Jig or Helper: (Optional, but recommended) Scissors Pliers (for stopping) 1. Prepare the Zipper Tape

If the zipper teeth are not aligning correctly, pull the slider back off and ensure one side of the tape is slightly shorter (staggered) before re-inserting it. Mesh Projects: If using with mesh, topstitch 18one-eighth inch from the edge to secure it.

Pull the zipper tape toward you. It will "click" or slide onto the tape, joining the teeth. Remove: Pull the fully attached slider off the jig. 3. Secure the Zipper (Stopping) To prevent the zipper pull from sliding off the end:

Place a small metal bottom stop with pliers to secure it permanently. Tips for Success